As he was looking around, he stumbled upon a king headboard too. It was marked $20 but he talked them down to $5 because of some damage we would have to fix! Awesome find!
Well, like many projects it sat in our house/garage for 7 months before figuring out how we were going to put it to use. At first, we thought there was only a small gash that could be filled and restained or painted. But then we noticed one of the sleigh curves on the side was missing. It was going to be tougher then we thought to fix it and make look good.
A few weeks passed, I came up with the idea of creating a tuffed upholstered headboard. I did a little research and looked over pinterest.
Supply List:
Cost: $112*
*With sales and Joann's coupons
Do you know that there's a Joann's APP? If you don't have it, then GO get it! There are all the current coupons right there on your phone and they just scan your phone. How cool is that?! And did you know that they let you use multiple coupons at once?! Seriously get the app!
The How:
#1: Find an old, solid headboard that you aren't using or from goodwill or garage sale. Other sites used plywood. Reusing something is green. ;)
#2: mark and measured where you want your tuffs to be located.
#3: drill holes in board.
#4: cut your 2" foam to size and use spray adhesive to attach it to the board.
#5: use batting or an old sheet (the green alternative) to cover the foam and use a staple gun to attach to the back of the board.
#6: select your material to cover your headboard. I ended up using a set of two curtain panels I found at Home Goods. They were 84" in length and about 54" wide. If you decided to purchase fabric it would need to be at least 3-4 yards, depending on the size of your headboard. To have enough length on the sides, I had to have one seam and decided to put that right down the middle. Make sure you fabric is straight, especially of there is a design of any kind. Use staple gun to secure tightly. These will likely be temporary staples** and you will add more later. Use enough that fabric stays in place, 4 corners and center at least.
{tuffed top}
**I did not use temporary staples like I wrote in step 6 but it is something I learned that I should have done through my experience. If you want to staples all around, use as many staples as desired. I just ended up having to removed almost all my first staples once I did all the tuffing because there were wrinkles and the fabric needed to be pulled tighter.
#7: use a botton cover kit and make all your buttons. The instructions on back of the kind I picked were easy to follow.
#8: begin the tuffing process.
#9: pull material tight and finish stapling it securely to the back of the board.
#10: attach to bed frame.
